SHORE POWER SOLUTION GIVES SAVVY RV BUILDERS AN EDGE
The SmartPlug has a pin and clip design that provides over 27 times more metal-to-metal contact to lessen electrical resistance and overheating. This not only makes it safer than other designs, but it also reduces the chances of electrical system overload. Because the IP56-rated ergonomic connector is asymmetrical and pushes straight in with self-locking features, the device is more secure and easier to use.
For OEMs with designated shore power locations, the SmartPlug uses industry-standard sizing and hole spacing for a pain-free conversion. The inlet is available in 316 cast stainless steel or non-metallic heat- and UV-resistant white, gray, or black. Matching phone/TV/data port inlets are available. Cordsets are 30′ long and made of premium Superflex cable for maximum flexibility, even in cold weather.
SmartPlug Systems products are made in the USA. Last year, the company expanded its manufacturing space by over 40% to meet increasing demand. It holds Canadian CSA, Europe CE, Intertek ETL, and US ETL certifications.
Get More Info : SHORE POWER SOLUTION GIVES SAVVY RV BUILDERS AN EDGE
FOR MORE INFORMATION CONTACT:
SmartPlug Systems
2500 Westlake Ave N., Ste. G,
Seattle, WA 98109-2262.
206-285-2990
Fax: 206-285-2981.
www.smartplug.comHow to Prepare Your Boat for Winter
As winter draws near, the boating season slows down for many boating enthusiasts located in colder regions. Boat owners are making plans to store their boats if they haven’t already. If you’re a boat owner and are making the same preparations, we’ve compiled a few steps on how to prepare your boat for winter. “Winterizing” your boat is a must to keep your vessel in peak condition and ready for the spring/summer boating season.
Since your boat is a significant investment, proper planning is required to prepare it for the winter season. If you do not winterize your boat, you could put your vessel at risk of developing rust and accelerating its wear during this storage period.
STEP 1 – Empty and Clean Your Boat
Likely an obvious first step is to empty and clean your boat. As soon as you get the boat out of the water, give it a thorough cleanse to remove any dirt or debris. Ensure you use the correct cleaning products to avoid scratching the boat. Aside from removing your valuables from the interior of the boat, be sure to clean out your fridge, freezer, and cabinets too. Anything that may freeze and break should be removed from the boat. Also, take preventative measures to avoid mold and mildew building. A humidifier is a reliable option to help control moisture throughout the cabin, for example.
STEP 2 – Inspect the Electrical System
Confirming your boat’s electrical components are properly working before storage is critical. Check your electrical connector and power cord. Should you notice signs of a loose connection, corrosion, discoloring, rust, or burns, in your current shore power system, it’s time to upgrade. With SmartPlug, you’ll have a secure, weatherproof electrical connection, with boat safety standards met. Review our lineup of marine products here.
Get More Info : Best Boat accessories | Boat accessories
SmartPlug Dock & Lift Kit | rv shore power kit
Reduces Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand.
Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
Multi-Point Locking System – Side clips lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord.
Weatherproof Seals – Superior gaskets installed in the inlet cover and interior of the plug body eliminates moisture penetration.
Get More Info : shore power kits
Websites : https://smartplug.com/
Contact Us : shore power connections
SHORE POWER SOLUTION GIVES SAVVY BOATBUILDERS AN EDGE | RV SHORE POWER INLET
Smart OEMs are constantly looking for products and features that provide them with a competitive edge and encourage sales of boats. The shore power solution from SmartPlug Systems is available in 30A 125V or 50A 125/250V. These plug-and-play components have a great cost-benefit ratio for both production and custom boatbuilders, as well as for equipment manufacturers using electrical connection components. This is a perfect standard or optional upgrade to any vessel.
Especially for new boat buyers, shore power equipment can be intimidating. The SmartPlug is a safer, simpler, and more secure solution than traditional twist-type L5-30 AC connectors. Even experienced owners instantly see the benefits of the unique system.
The SmartPlug has a pin and clip design that provides over 27 times more metal-to-metal contact to lessen electrical resistance and overheating. This not only makes it safer than other designs, but it reduces the chances of electrical system overload. Because the IP56-rated orange ergonomic connector is asymmetrical and pushes straight in with self-locking features, the device is more secure and easier to use. The top of the connector is integrated with LED lights that alert the user if the pedestal is improperly wired in a reverse polarity condition.
For OEMs with designated shore power locations, the SmartPlug uses industry standard sizing and hole spacing for a pain-free conversion. Internal electronics are fully encased in thermal epoxy to make them 100% weatherproof. The inlet is available in 316 stainless steel or white, gray, or black polymer that are heat and UV-resistant. Matching ELCI and phone/TV/data port inlets are available. Tinned-wire Superflex cordsets are available in 25′ and 50′ lengths.
As the needs of the marine industry evolve, SmartPlug Systems responds. The company works with manufacturers that require component-specific startup power rather than relying on batteries or gensets. It has even recently partnered with Eaton on new state-of-the-art marina pedestals.
SmartPlug System products are made in the USA. Last year, the company expanded its manufacturing space by 40% to maintain production capacity. It holds Canadian CSA, Europe CE, Intertek ETL, and US ETL certifications.
FOR MORE INFORMATION CONTACT:
SmartPlug Systems, 2500 Westlake Ave N., Ste. G, Seattle, WA 98109-2262.
206-285-2990
Fax: 206-285-2981.
The Ultimate Guide to Traveling in an RV and Child Safety
Traveling in an RV with your family is a terrific way to spend quality time together. You get to experience the beautiful outdoors along with everything our country has to offer!
There’s no need for
- Incessant packing and unpacking
- Hotel transfers…
- And cramming everyone into tiny spaces for extended periods…
Best of all, you create an environment where everyone feels at home!
That said, it’s crucial to keep the safety of your children in mind before you begin your adventures together.
Here are Important Things to Look Out for When Traveling with Children
Choose a Safe RV
The Child Passenger Safety Technicians and Instructors (CPSTs) recommend that families choose a non-motorized/tow-able RV (fifth-wheel, trailer, tent trailer, truck camper) when traveling with children.
These are either towed by a passenger vehicle or transported on a pick-up truck.
It allows your kids to travel along with you in a passenger vehicle that complies with Federal occupant safety regulations. Plus, you can efficiently set up child restraint devices without worry.
If you decide to use a motorized RV (Class A, B, or C), it’s important to know that they’re not required to have rear occupant crash testing. Nor do they meet federal seat belt standards for rear seating.
More Info : The Ultimate Guide to Traveling in an RV and Child Safety
The Ultimate Guide to Traveling in an RV and Child Safety
Traveling in an RV with your family is a terrific way to spend quality time together. You get to experience the beautiful outdoors along with everything our country has to offer!
There’s no need for
- Incessant packing and unpacking
- Hotel transfers…
- And cramming everyone into tiny spaces for extended periods…
Best of all, you create an environment where everyone feels at home!
That said, it’s crucial to keep the safety of your children in mind before you begin your adventures together.
Here are Important Things to Look Out for When Traveling with Children
Choose a Safe RV
The Child Passenger Safety Technicians and Instructors (CPSTs) recommend that families choose a non-motorized/tow-able RV (fifth-wheel, trailer, tent trailer, truck camper) when traveling with children.
These are either towed by a passenger vehicle or transported on a pick-up truck.
It allows your kids to travel along with you in a passenger vehicle that complies with Federal occupant safety regulations. Plus, you can efficiently set up child restraint devices without worry.
If you decide to use a motorized RV (Class A, B, or C), it’s important to know that they’re not required to have rear occupant crash testing. Nor do they meet federal seat belt standards for rear seating.
More Info : The Ultimate Guide to Traveling in an RV and Child Safety
50A SmartPlug Male Connector to 50A Female 4ft Twist-type Connector | Cordset
-
Multi-Point Locking System – Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from movement of the power cord.
-
Weatherproof Seals – Superior gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet.
-
Reverse Polarity – New for 2021 is SmartPlug’s Reverse Polarity Indicator System. Reverse Polarity is a safety concern and can damage electrical components on a coach or trailer.
Get More Info : Shore power connections
